SILK AC POWER CONDITIONER
The principle of SILK is to remove the radio frequency interference - in GIGA and MEGA hertz, while not affecting the 50/60 Hz AC fundamental.
All known hi-fi devices react with improved clarity and holographic realism, while the dynamics both macro and micro is raw and unspoiled.
Four individual receptacles (outlets) are separated by own filters so interference does not cross from one component to another.
Having 4 outlets serves as AC SPLITTER BOX which organizes everything neatly in the rack. Shall you need more - simply order two SILKs.
Technically the SILK filter is “just” a CLC PI type filter with lowpass function around 100 kHz.
The caps are superfast hi-voltage ceramics 5,6 nF / 1600 VAC and the ferrite ring cores are of very high core density.
I use thick wires - 2,5 mm pure solid core copper (Polish copper, not contaminated like the dirty "copper" from Far Far Away made from recycled scrap. )
We also offer pure silver version with 99,97 wiring solid silver core and with Duelund pure silver caps (6 of them) for the ULTIMATE GUCCI SILK.
The AC outlets on the pictures above are SHUKO type .
We use LEGRAND outlets from France, because only Legrand offered european made high quality outlets which in one common mount and shape offer Shuko, USA and UK plug compatibility.
The effect of SILK: more legible, naturally layed out sound stage, easier instrument separation, wider stage, cleaner timbre of instruments and voices, quieter background, more pleasant sound overall.
Read below about the SCHUKO standard from Wikipedia:
The Schuko system originated in Germany and goes back to a patent (DE 370538) granted in 1926 to Albert Büttner, a Bavarian manufacturer of electrical accessories. It is used today in more than 40 countries, including most of Continental Europe.
France, Belgium, the Czech Republic, Slovakia and Poland use a type of plug and socket (CEE 7/5) with the same size and spacing of the main pins but with a male protective-earth pin on the socket instead of the earth clips and without the guiding notches at the sides. Most modern moulded-on Schuko plugs, and good-quality rewirable replacements, are a hybrid version with an extra hole ("CEE 7/7") that also accommodates the earth pin of French sockets.
•Denmark (CEE 7/17 and and Dainish standard 107-2-D1 are widely used, they accept CEE 7/7 plugs but without compatibility for earth connections. CEE 7/5 and CEE 7/4 sockets with child-proof shutters has been allowed since 2008/2011, but people are not using them yet).
•Ireland (BS1363 / Equivalent Irish Standard: IS 401) but see below,
•Italy (CEI 23-16/VII),
•The United Kingdom, including Gibraltar (BS 1363)
In Italy, CEI 23-16/VII is the dominant standard, though Schuko is also an approved standard and is in common use. Appliances are sold with either Italian or Schuko-type plugs. A minority of sockets accept both types, the remainder accepting one or the other. Schuko sockets are most commonly used for larger-rated appliances such as washing machines, and are particularly common in South Tyrol, with its cultural, economic and tourist connections with Austria.
Although Schuko has never been a standard (or the de facto norm) in Belgium or France, it is sometimes encountered in older installations in eastern regions of Belgium and Alsace. Newer installations adhere to national standards.
In parts of the Republic of Ireland, Schuko was commonly installed until the 1960s. For safety reasons and to harmonize with the UK (with which Ireland has a long-standing free travel arrangement) and avoid having a different outlet type in Northern Ireland and the Republic of Ireland, the Republic standardized on BS1363 (transposed into Irish Standards as IS401 (Plug) and IS411 (Socket outlet). Schuko has been phased out of use in Ireland and will be encountered very rarely. Some hotels provide a Schuko outlet alongside BS1363 outlets for the convenience of visitors from the Continent.
Russia, while maintaining its own mains connector standard, has it largely harmonized with the relevant European regulations since Soviet times. The original Soviet standard was mostly compatible with europlug (traditional Soviet plug used straight 4 mm pins with 19 mm spacing and thus Soviet sockets were able to easily accept europlugs), and since Schuko introduction was modified to include its specifications, due to the large volume of imported appliances equipped with the Schuko plug. This was necessitated by the fact that 4 mm holes in the Soviet sockets could not accept 4.8 mm Schuko pins without modification. Nowadays most sold and installed sockets in Russia are Schuko ones, though they may lack grounding wire connection, especially in older buildings, as this wasn't required by the Soviet wiring regulations.